• C$545.96



Free shipping over 100$ ( except items in specials )


There's a lot of boards that say they're all mountain killers, but do they actually mean it? The Yes Pick Your Line Snowboard features a directional CamRock profile that, when combined with the PYL's variable sidecut Tapered Underbite, makes it a weapon across a wide range of conditions. And when combined with a stiff, chunder-destroying flex, it's easy to see why this is DCP's board of choice when ripping top to bottom lines at full speed.

Rocker Type

CamRock 1-4-2 – Rocker in the tail, camber underfoot, and raised rocker in the nose for float in powder.


8 – (1 Soft - 10 Stiff)


Tapered Underbite – Each side of the board is segmented into 3 distinct parts, each with different radiuses. Traditional "tapered boards" take the full sidecut and pull the tail inward which is why they tend to wash out. The Tapered UnderBite Corrects this by: 1) keeping the sidecut parallel to the corresponding one on the other side of the board 2) increasing the sidecut depth as you move towards the tail creating a corrective hook to the taper.


Weightless Core – The Weightless Core strikes a critical balance between light weight and strength. Using a lower density species of Poplar in areas that are not as structured and Paulownia in the areas that are, Yes. was able to shave precious weight. This helps the board not only float, but "feel" floaty.


Triax – Robust torsional flex./ Ash Veneer Topsheet


Sintered True – Pellets or course powder is pressed until it forms a solid. There are several suppliers for our entire industry and they each have different codes for them, depending on the color and transparency. These codes can make it seem like you’re getting many different kinds and grades of sintered but they’re all pretty much the same as far as you and I will ever tell. True Sintered is harder and more expensive than extruded and it can be faster for those that ride aggressively fast. But to do that, it needs to be waxed and prepared for local conditions.